Econo Metal Buildings
8’x12’ has a 4’ rollup. Larger sizes have 5’ rollup doors.
- 4×6 runners – all ground contact treated
- Floor joists – all 12” on center except the metal Econo on 16” center
- Wall studs 16” on center in all Vinyl, Painted & Urethane buildings
- 25 yr. 5⁄8 Thickness floor- high strength, Tongue & Groove Performax Shed Floor.
- Garage floors are 25 year 3⁄4” Thickness floor- high strength, Tongue & Groove by Scotch Guard
- Metal buildings all screwed (not nailed)
- All buildings vented
- Vapor barrier under all metal roofs
- Wide selection of top quality vinyl siding, metal, and shingles • All metals and trim by GPB
- Rollup doors available 4’ – 8’ wide
- Single or double 36” fiberglass doors
- All door openings have Diamond Tread Thresholds • Paints and urethanes by Haley Paint
8×12
10×12
10×16
10×20
Options are discouraged with this model. If any options are needed visit our Standard Metal Shed for more upgrade options.
All pricing with the exception of metal and vinyl garages (built on site) are priced to be delivered fully constructed. We ask that the customer checks the path leading to desired location of the shed site to ensure of at least 16” greater width than the shed. The driver will then offload in the driveway or street and carry the shed in with the mule (see pic on back cover). If conditions are too tight we offer a build on site service (see options on page 12 for pricing).
The customer is to provide 2” and 4” thick solid concrete patio blocks for the driver to level the building. We encourage a level gravel base for buildings larger than 12’x24’. We discourage any leveling with patio blocks if the shed site is off level more than 20” end to end or side to side. A charge of $9.00 per inch will be accessed anything exceeding 20” off level.
